2ED020I12FIXUMA1

2ED020I12FIXUMA1 is a high voltage, high-speed power MOSFET and IGBT driver with interlocking high and low side referenced outputs. The floating high-side driver may be supplied directly or by means of a bootstrap diode and capacitor. In addition to the logic input of each driver the 2ED020I12-FI is equipped with a dedicated shutdown input. All logic inputs are compatible with 3.3V and 5V TTL. The output driver features a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high-frequency applications. Both drivers are designed to drive an N-channel power MOSFET or IGBT which operate up to 1.2kV. In addition, a general-purpose operational amplifier and a general-purpose comparator are provided which may be used for instance for current measurement or overcurrent detection.

• On-chip 1 ohm bootstrap diode
• CMOS Schmitt-triggered inputs with pull-down, non-inverting inputs
• Interlocking inputs, dedicated shutdown input with pull-up
• Power supply operating range from 14 to 18V
• High dV/dt immunity, matched propagation delay for both channels
• Low power consumption, general purpose operational amplifier
• 2.4mA typ high side quiescent supply current at (VSH = 15V)
• 85ns typ turn-on propagation delay at (GNDH = 0V 20% Vout)
• 20MHz typ OP gain-bandwidth product
• Storage temperature range from -55°C to 150°C, DSO-18 package

注意事項

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.