以下のハイライト表示されたフィールドに入力された値に、無効な文字が含まれています。有効な文字のみを使用して選択内容を変更してください。

製品が検索に完全に一致しない場合があります

この製品を以前に購入しました。 注文履歴で表示

 
 

NXP MC33CD1020AESR2

特殊 インターフェース, SPI, 複数スイッチ検出 インターフェイス, 3 V, 5.25 V, WFQFN-EP, 32 ピン

NXP MC33CD1020AESR2

画像は説明用のイメージです。製品説明をご参照ください。

製造業者:
NXP NXP
メーカー 部品番号:
MC33CD1020AESR2
ご注文 コード:
4333678
  • 上記のテキストボックスにカスタム品番を入力してください
  • 最多の部品番号が追加されました。
    古い項目を削除して新しい項目を追加する。

保存された品番

Part Number Saved

製品 範囲
-
技術データシート:
MC33CD1020AESR2   データシート
ECAD / MCAD
Supply Frame Models Link
すべての技術資料を表示する

製品概要

MC33CD1020AESR2 is a cost optimized multiple switch detection interface device designed to detect the closing and opening of up to 22 switch contacts. The switch status, either open or closed, is transferred to the microprocessor unit through a Serial Peripheral Interface. This SMARTMOS device also features a 22-to-1 analogue multiplexer for reading the input channels as analogue inputs. The analogue selected input signal is buffered and provided on the AMUX output pin for the MCU to read. It has two modes of operation, normal and low-power mode. Normal mode allows programming of the device and supplies switch contacts with pull-up or pull-down current as it monitors the change of state on the switches. It provides low quiescent current, which makes CD1020 ideal for automotive and industrial products requiring low sleep-state currents. Application includes automotive, heating ventilation and air conditioning, lighting, central gateway/in-vehicle networking, gasoline engine management.
  • Fully functional operation 6.0V ≤ VBATP ≤ 36V, full parametric operation 6.0V ≤ VBATP ≤ 28V
  • Supply voltage range from 3.0 to 5.25V, operating switch input voltage range from -1.0V to 36V
  • Eight programmable inputs (switches to battery or ground)
  • 14 switch-to-ground inputs, interfaces directly to an MCU using 3.3V / 5.0V SPI protocol
  • Selectable wake-up on change of state
  • Supply voltage range from 3.0 to 5.25V
  • Active interrupt (INT-B) on change-of-switch state
  • Transfer frequency is 8.0MHz max (TA = -40°C to +125°C, VDDQ = 3.1V to 5.25V)
  • Temperature monitor range from 155 to 185°C (VDDQ = 3.1V to 5.25V)
  • 32-pin QFN package, ambient temperature range from -40°C to 125°C

製品情報

類似製品をご覧になられますか? 下記の必要な属性を選択し、ボタンをクリックしてください ×


:
SPI

:
複数スイッチ検出 インターフェイス

:
3V

:
5.25V

:
WFQFN-EP

:
32ピン

:
-40°C

:
125°C

:
-

:
AEC-Q100

類似製品を探す 上記の属性を選択、変更することにより、類似製品が検索できます。

技術文書 (2)

梱包形態 カット テープ

4,980 在庫あり さらに必要ですか?

4,980 当社 UK 倉庫から 3-4 営業日以内に配達

市場の状況により、納期は一般的な目安であり、都合により急遽変更される場合があります。

¥760.92 (¥837.01 消費税込み)

価格設定を利用できません。カスタマーサービスにお問い合わせしてください。

価格:
各(カットテープで提供)
Multiple: 1 最小: 1
  • 1+
  • 10+
  • 25+
  • 50+
  • 100+
  • 250+
  • 500+
  • 1000+
数量 価格 (消費税込み)
1+ ¥760.92 (¥837.01)
10+ ¥508.31 (¥559.14)
25+ ¥473.09 (¥520.40)
50+ ¥444.01 (¥488.41)
100+ ¥414.92 (¥456.41)
250+ ¥295.68 (¥325.25)
500+ ¥295.50 (¥325.05)
1000+ ¥290.56 (¥319.62)
数量 価格 (消費税込み)

価格設定を利用できません。カスタマーサービスにお問い合わせしてください。

No longer stocked:: No Longer Manufactured::
買い物かごに入れる 買い物かごに入れる プレオーダー 制限された品目
行ノートを入力してください
合計金額:
合計金額: ( )
合計金額: --