以下のハイライト表示されたフィールドに入力された値に、無効な文字が含まれています。有効な文字のみを使用して選択内容を変更してください。

製品が検索に完全に一致しない場合があります

この製品を以前に購入しました。 注文履歴で表示

 
 

INFINEON CY8CKIT-002

プログラム および デバッグ キット, PSoC MiniProg3, SWD / JTAG/ ISSP/ USB-I2C に対応, 10-ピン SWD/JTAG ヘッダー

画像は説明用のイメージです。製品説明をご参照ください。

製造業者:
INFINEON INFINEON
メーカー 部品番号:
CY8CKIT-002
ご注文 コード:
1753960
  • 上記のテキストボックスにカスタム品番を入力してください
  • 最多の部品番号が追加されました。
    古い項目を削除して新しい項目を追加する。

保存された品番

Part Number Saved

製品 範囲
-
別名:
SP005670403, CY8CKIT-002
技術データシート:
CY8CKIT-002   データシート
ECAD / MCAD
Supply Frame Models Link
すべての技術資料を表示する

製品情報

類似製品をご覧になられますか? 下記の必要な属性を選択し、ボタンをクリックしてください ×


:
Infineon

:
32ビット

:
PSoC

:
ARM

:
Cortex-M3

:
-

:
MiniProg3, Program/Debug Ribbon Cable, USB Cable

:
-

類似製品を探す 上記の属性を選択、変更することにより、類似製品が検索できます。

技術文書 (3)

製品概要

CY8CKIT-002 is a PSoC MiniProg3 program and debug kit an all in one programmer for PSoC 1, PSoC 3 and PSoC 5 architectures and a USB-I2C Bridge for debugging I2C serial connections and communicating to PSoC devices. It is a protocol translation device. PSoC 1 has 8bit M8C CPU core and flash program memory up to 32KB. PSoC 3 has Single cycle 8bit 8051 CPU core and flash program memory up to 64KB. PSoC5 has 32bit ARM Cortex M3 CPU core and flash program memory up to 256KB. The MiniProg3 programmer or debugger provides the flexibility to work with different programming and debugging interfaces such as JTAG, SWD, ISSP and I2C. Which enables communication with target devices using I/O voltage levels from 1.5V to 5.5V. The bridging capabilities are used by PSoC Designer, PSoC Creator, PSoC Programmer. Secondary software such as Bridge Control Panel and Clock Programmer use the programmer COM hardware layer to support MiniProg3 functionality.
  • It has 5 pin ISSP/I2C/SWD connector
  • It has 10 pin JTAG/SWD connector
  • Busy LED
  • Status LED
  • SWD debugging protocol used for PSoC 3, PSoC 5
  • JTAG debugging protocol used for PSoC 3
  • I2C debugging protocol used for limited PSoC 1 devices

Contents

MiniProg3 programmer/debugger, 10 pin ribbon cable, USB cable, Software CD, Quick start guide.

注意事項

ESD can damage boards and associated components. Recommends that you work on the board at an ESD workstation or use appropriate ESD protection such as an antistatic wrist strap attached to a ground.

別名

SP005670403, CY8CKIT-002

266 在庫あり さらに必要ですか?

64 当社 SG 倉庫から 2-3 営業日以内に配達
202 当社 UK 倉庫から 3-4 営業日以内に配達

市場の状況により、納期は一般的な目安であり、都合により急遽変更される場合があります。

¥19,759.15 ( ¥21,735.07  消費税込み)

価格設定を利用できません。カスタマーサービスにお問い合わせしてください。

価格:
それぞれ
Multiple: 1 最小: 1
  • 1+
数量 価格 (消費税込み) お客様の価格(消費税込み)
 
 
1+ ¥19,759.15 (¥21,735.07)
プロモーション価格
契約価格
オンライン限定価格
オンライン限定契約価格
  ( )
数量 価格 (消費税込み) お客様の価格(消費税込み)
 
 

価格設定を利用できません。カスタマーサービスにお問い合わせしてください。

No longer stocked:: No Longer Manufactured::
買い物かごに入れる 買い物かごに入れる プレオーダー
追加
制限された品目
行ノートを入力してください
合計金額:
合計金額: ( )
合計金額: --