MAX6710IUT+T

The MAX6710IUT+T is a low voltage, high accuracy, quad voltage microprocessor supervisory circuit in 6 pin SOT-23 package. This precision quad voltage microprocessor (μP) supervisory circuits monitor up to four system supply voltages and assert a single reset if any supply voltage drops below its preset threshold. This device significantly reduce system size and component count while improving reliability compared to separate ICs or discrete components. A single active-low output asserts when any monitored input falls below its associated threshold. The open-drain output has a weak internal pull-up (10μA) to IN2. For the MAX6710, reset remains low for the reset timeout period (140ms min) after all voltages rise above the selected threshold.

• Supply voltage range is 1.2V to 5.5V
• Operating temperature range from -40°C to 85°C
• Low 35μA supply current
• Open drain RESET output with 10μA internal pull-up
• RESET valid to IN1 = 1V or IN2 = 1V
• Immune to short monitored supply transients
• Monitors two fixed voltages 3.3V, 2.5V and two adjustable voltages
• Adjustable voltage threshold monitors down to 0.62V with 1.5% accuracy
• Supply voltage tolerance is 10%

注意事項

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

注意

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party