MAX485CSA+

MAX485CSA+ is a low power transceiver for RS-485 and RS-422 communication. It contains one driver and one receiver. The driver slew rates of the MAX485CSA+ is not limited, allowing it to transmit up to 2.5Mbps. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. Applications include low-power RS-485 transceivers, low-power RS-422 transceivers, level translators, transceivers for EMI-sensitive applications and industrial-control local area networks.

• Half duplex communication
• 300μA quiescent current
• 32 number of receivers on bus
• Input current is ±2µA maximum at (DE, DI, active-low RE, VCC = 5V ±5%)
• Receiver input hysteresis is 70mV typical at (VCM = 0V, VCC = 5V ±5%)
• Driver rise or fall time is 15ns typical at (RDIFF = 54ohm, CL1 = CL2 = 100pF)
• Receiver input to output is 90ns typical at (RDIFF = 54ohm, CL1 = CL2 = 100pF)
• Receiver short-circuit current is 95mA maximum at (VCC = 5V ±5%, 0V ≤ VO ≤ VCC)
• 0°C to +70°C operating temperature range
• 8 SOIC package

注意

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party