LTC4370IMS#PBF

LTC4370 is a two-supply current sharing controller which incorporates MOSFET ideal diodes. The diodes block reverse and shoot-through currents during start-up and fault conditions. Their forward voltage is adjusted to share the load currents between supplies. Unlike other sharing methods, neither a share bus nor trim pins on the supply are required. The maximum MOSFET voltage drop can be set with a resistor. A fast gate turn-on reduces the load voltage drop during supply switchover. If the input supply fails or is shorted, a fast turn-off minimizes reverse current transients. It is widely used in application such as redundant power supplies, high availability systems and servers, telecom and network infrastructure etc.

• Shares load between two supplies
• Eliminates need for active control of input supplies
• Blocks reverse current
• 0V to 18V high side operation
• Enable inputs
• MOSFET on status outputs
• Operating voltage range is 2.9V to 18V
• Dual ideal diode mode
• Operating temperature is -40°C to 85°C
• Packaging style is 16-lead plastic MSOP

注意

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party