LTC1998CS6#TRMPBF

LTC1998 is a micropower comparator and a precision adjustable reference. It is optimized for lithium-ion low battery detection circuits. It features a voltage detection circuit with an adjustable threshold voltage and hysteresis. The threshold voltage can be programmed from 2.5V to 3.25V with two external resistors. A 10mV to 750mV hysteresis can be added with a third external resistor. A separate power supply pin, VLOGIC, allows the battery-low logic output to operate below the battery voltage, allowing compatibility with low voltage microprocessors without a pull-up resistor. Power supply glitches are eliminated by preventing the cross-conducting current which occurs when the output changes state. It is used in application such as lithium-ion battery-powered equipment, PDAs, cell phones, handheld instruments, battery packs, pagers, palm top computers, POS terminals etc.

• High accuracy trip voltage: 1% max error using external 1% resistors
• Adjustable threshold voltage and hysteresis
• Quiescent current is 2.5μA typical
• Output swings rail-to-rail
• Output state guaranteed for VBATT ≥1.5V
• Propagation delay is 350μs typical at (overdrive = 10mV, TA = 25°C, VGND = 0V)
• Operating temperature is -40°C to 85°C
• Package style is 6-lead plastic TSOT-23

注意

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party