PYH200-72WS12

PYH200-72WS12 is a 200W, single output PYH200 series DC to DC converter. The 200W half-brick footprint PYH series of isolated DC to DC converters operate from an ultra wide range input of 14 to 160VDC (12:1) with single output voltage of 12VDC. The output voltage can be adjusted between -20% to +15% by using the trim terminal. Sense lines for the output voltage ensure a stable output voltage even with changing loads. The input to output isolation is 3,000Vac and the units are potted to provide a high resistance to shock and vibration. The converters are certified according to the 62368-1 safety standards and with additional circuits, the PYH200 series is also tested according to the EN 50155 railroad standard for electronic equipment in railroad vehicles.

• Maximum current is 16.7A
• No load input current is 50mA
• Efficiency is 90 / 90% at 72 / 110VDC
• Maximum load capacitance of 16,700uF
• Potted plastic case
• Operate in ambient temperature of -40 to 100°C
• Features positive logic, remote on/off and M3 thread
• High resistance to shock and vibration
• 61.0 x 57.9 x 12.7mm size
• 3 years warranty