以下のハイライト表示されたフィールドに入力された値に、無効な文字が含まれています。有効な文字のみを使用して選択内容を変更してください。

製品が検索に完全に一致しない場合があります

この製品を以前に購入しました。 注文履歴で表示

 
 

4D SYSTEMS 4DPI-24-HAT

ドーターボード, 2.4 インチ 1次 ディスプレイ HAT, Raspberry Pi用, 320x240 抵抗膜方式 タッチスクリーン

画像は説明用のイメージです。製品説明をご参照ください。

メーカー 部品番号:
4DPI-24-HAT
ご注文 コード:
2456984
  • 上記のテキストボックスにカスタム品番を入力してください
  • 最多の部品番号が追加されました。
    古い項目を削除して新しい項目を追加する。

保存された品番

Part Number Saved

製品 範囲
Displays
技術データシート:
4DPI-24-HAT   データシート
ECAD / MCAD
Supply Frame Models Link
すべての技術資料を表示する

製品範囲選択 (Displays)

この製品範囲のすべてを表示する

製品情報

類似製品をご覧になられますか? 下記の必要な属性を選択し、ボタンをクリックしてください ×


:
0

:
0

:
Compatible with Raspberry Pi 2 Model B, Raspberry Pi Model B+ / A+

:
0

:
Displays

:
0

:
0

:
0

類似製品を探す 上記の属性を選択、変更することにより、類似製品が検索できます。

技術文書 (4)

製品概要

The 4DPI-24-HAT is a 2.4-inch 320 x 240 Primary Display HAT for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel, enabling the 4DPi-24-HAT to function with the Raspberry Pi without the need for a mouse. Communication between the 4DPi-24-HAT and the Raspberry Pi is interfaced with a high speed 48MHz SPI connection, which utilises an on-board processor for direct command interpretation and SPI communication compression and features a customised DMA enabled kernel. It is designed to work with the Raspbian operating system running on the Raspberry Pi, as that is the official Raspberry Pi operating system. The 4DPi-24-HAT is powered directly off the Raspberry Pi's 40 way Header and the 2.4" touch screen allows effortless interaction with the Raspbian operating system.
  • Universal 2.4" primary display for the Raspberry Pi
  • Compatible with Raspberry Pi A+, B+ and Raspberry Pi 2
  • 320 x 240 QVGA Resolution, RGB 65K true to life colours
  • TFT screen with integrated 4-wire resistive touch panel
  • Display full GUI output/primary output, just like a monitor connected to the Raspberry Pi
  • Powered directly off the Raspberry Pi, no external power supply is required
  • 25FPS Typical frame rate, higher if image is able to be compressed by Kernel
  • On/Off or PWM controlled backlight, selectable by on board jumper
  • On board identification EEPROM

製造終了

¥5,969.55 (¥6,566.51 消費税込み)

価格設定を利用できません。カスタマーサービスにお問い合わせしてください。

価格:
それぞれ
Multiple: 1 最小: 1
  • 1+
  • 10+
数量 価格 (消費税込み)
1+ ¥5,969.55 (¥6,566.51)
10+ ¥5,850.16 (¥6,435.18)
数量 価格 (消費税込み)

価格設定を利用できません。カスタマーサービスにお問い合わせしてください。

No longer stocked:: No Longer Manufactured::
買い物かごに入れる 買い物かごに入れる プレオーダー 制限された品目
行ノートを入力してください
合計金額:
合計金額: ( )
合計金額: --