You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
TEXAS INSTRUMENTS TCA9406DCUR
Specialized Interface, I2C, I2C Bus & SMBus Systems Applications, 1.65 V, 3.6 V, US8, 8 Pins
- Manufacturer:
- TEXAS INSTRUMENTS TEXAS INSTRUMENTS
- Manufacturer Part No:
- TCA9406DCUR
- Order Code:
- 3124881
-
-
Maximum Part Numbers added.
Delete older entries to add more.
- Product Range
- -
- ECAD / MCAD
-
Product Overview
The TCA9406DCUR is a 2-bit bidirectional I²C and SMBus Voltage-level Translator with an output enable (OE) input. It is operational from 1.65 to 3.6V on the A-side, referenced to VCCA and from 2.3 to 5.5V on the B-side, referenced to VCCB. This allows the device to interface between lower and higher logic signal levels at any of the typical 1.8, 2.5, 3.3 and 5V supply rails. The OE input pin is referenced to VCCA, can be tied directly to VCCA, but it is also 5.5V tolerant. The OE pin can also be controlled and set to a logic low to place all the SCL and SDA pins in a high-impedance state, which significantly reduces the quiescent current consumption. Under normal I²C and SMBus operation or other open-drain configurations, the TCA9406 can support up to 2Mbps; therefore, it is compatible with standard I²C speeds where the frequency of SCL is 100kHz (Standard-mode), 400kHz (Fast-mode) or 1MHz (Fast-mode Plus).
- 2-bit Bidirectional translator for SDA and SCL lines in I²C applications
- Provides bidirectional voltage translation with no direction pin
- Internal 10kΩ pull-up resistor on All SDA and SCL pins
- No power-supply sequencing required
- OE Input can be tied directly to VCCA or controlled by GPIO
- Latch-up performance exceeds 100mA per JESD 78, class II
- Green product and no Sb/Br
Applications
Industrial, Motor Drive & Control, Building Automation, Metering, Power Management, Security
Warnings
Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- I2C
- :
- I2C Bus & SMBus Systems Applications
- :
- 1.65V
- :
- 3.6V
- :
- US8
- :
- 8Pins
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
Technical Documents (0)
Packaging type
Cut Tape
852 In stock Need more?
852 deliver in 3-4 business days from our UK warehouse :(UK stock) Order before 17:00 Mon-Fri (excluding National Holidays)
×
You can reserve stock now just order your desired quantity and checkout as normal. The quantity that cant be dispatched now will be placed on back order and sent as soon as we get a delivery from our supplier. You only get charged when the products are dispatched to you.
Extra stock is available upon order to the Supplier Lead Time which is approximately 7/6/26
852 deliver in 3-4 business days from our UK warehouse
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
¥123.09
(¥135.40 Inc. JCT)
Pricing is unavailable. Please contact customer services.
- Price for:
- Each (Supplied on Cut Tape)
Multiple: 1 Minimum: 1
- 1+
- 10+
- 100+
- 500+
- 1000+
- 2500+
- 5000+
| Quantity | Price (Incl JCT) |
|---|---|
| 1+ | ¥123.09 (¥135.40) |
| 10+ | ¥78.96 (¥86.86) |
| 100+ | ¥64.55 (¥71.01) |
| 500+ | ¥61.70 (¥67.87) |
| 1000+ | ¥59.74 (¥65.71) |
| 2500+ | ¥56.89 (¥62.58) |
| 5000+ | ¥55.54 (¥61.09) |
| Quantity | Price (Incl JCT) |
|---|
Pricing is unavailable. Please contact customer services.
Filter Tool