You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
STMICROELECTRONICS STULPI01BTBR
USB Interface, USB OTG Transceiver and Charge Pump, USB 2.0, 3 V, 4.5 V, TFBGA, 36 Pins
- Manufacturer:
- STMICROELECTRONICS STMICROELECTRONICS
- Manufacturer Part No:
- STULPI01BTBR
- Order Code:
- 2807111
-
-
Maximum Part Numbers added.
Delete older entries to add more.
- Technical Datasheet:
- STULPI01BTBR Datasheet
- ECAD / MCAD
-
Product Overview
STULPI01BTBR is a high-speed USB 2.0 transceiver which is compliant with ULPI (UTMI+ low pin interface) and OTG (On-The-Go) specifications, providing a complete physical layer solution for any high-speed USB host, device or OTG dual role core. It allows USB ASICs to interface with the physical layer of the USB through a 12-pin interface. It contains VBUS comparators, an ID line detector, USB differential drivers and receivers and a complete ULPI register map and interrupt generator. The STULPI01 transceiver is suitable for mobile applications and battery powered devices because of its low-power consumption, power-down, set-top box and portable navigation devices.
- USB-IF high-speed certified to the universal serial bus specification rev. 2.0
- Standard ULPI (UTMI+ low pin interface) 1.1 digital interface
- Fully compliant with ULPI 1.1 register set
- External square wave clock with VDVIO amplitude must be applied to oscillator input XI
- Supports 480Mbit/s high-speed, 12Mbit/s full-speed and 1.5Mbit/s low-speed modes of operation
- Supports 2.7V UART mode
- Ability to control external charge pump for higher VBUS currents
- Single supply +3V to +4.5V voltage range
- Integrated dual voltage regulator to supply internal circuits with stable 3.3V and 1.2V
- Integrated overcurrent detector, integrated HS termination and FS/LS/OTG pull-up/pull-down resistors
Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- USB OTG Transceiver and Charge Pump
- :
- USB 2.0
- :
- 3V
- :
- 4.5V
- :
- TFBGA
- :
- 36Pins
- :
- 480Mbps
- :
- 1Ports
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
- :
- -
Technical Documents (2)
Packaging type
Cut Tape
Available for back order
More stock available to supplier lead times which is approximately 6/9/25
×
19
You can reserve stock now just order your desired quantity and checkout as normal. The quantity that cant be dispatched now will be placed on back order and sent as soon as we get a delivery from our supplier. You only get charged when the products are dispatched to you.
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
¥1,183.47
(
¥1,301.82
Inc. JCT)
Pricing is unavailable. Please contact customer services.
- Price for:
- Each (Supplied on Cut Tape)
Multiple: 1 Minimum: 1
- 1+
- 10+
- 25+
- 50+
- 100+
- 250+
- 500+
| Quantity | Price (Incl JCT) | Your Price (Incl JCT) |
|---|---|---|
| 1+ | ¥1,183.47 (¥1,301.82) | ( ) |
| 10+ | ¥1,000.07 (¥1,100.08) | ( ) |
| 25+ | ¥926.40 (¥1,019.04) | ( ) |
| 50+ | ¥886.43 (¥975.07) | ( ) |
| 100+ | ¥846.45 (¥931.10) | ( ) |
| 250+ | ¥807.27 (¥888.00) | ( ) |
| 500+ | ¥785.32 (¥863.85) | ( ) |
| Quantity | Price (Incl JCT) | Your Price (Incl JCT) |
|---|
Pricing is unavailable. Please contact customer services.
Total Price:
Total Price: ( )
Total Price: --
Filter Tool